Hood

Hood

Removing






- Spray Nozzles, Removing,

- Remove the hose out of the opening in the hood - 1 -.

- Loosen the left and right bolts - 5 - (do not remove completely).

A second mechanic is required for the rest of the removal procedure.

- Remove the support rod.

- Remove the bolts - 5 - and only now and lift the hood - 1 - out of its hinges - 4 -.

Installation

Install the hood in the same manner in reverse order of removal.

- Screw tightening torque: 21 Nm.

- Hood, Adjusting, refer to => [ Hood, Adjusting ] Hood, Adjusting