Wire Routing, Connectors and Bracket on Valve Body

Wire Routing, Connectors and Bracket on Valve Body

In this chapter the information regarding working on the solenoid valves is shown in illustrations.

Wiring Routing and Connectors

• Mark the solenoid valve and/or sensor and its connector before disconnecting them.






1 - Solenoid Valve 4 (N91)

2 - Solenoid Valve 6 (N93)

3 - Solenoid valve 5 (N92)

4 - Solenoid Valve 9 (N282)

5 - Solenoid Valve 10 (N283)

6 - Solenoid Valve 3 (N90)

7 - Solenoid Valve 1 (N88)

8 - Solenoid Valve 2 (N89)

A - Transmission Output Speed Sensor Connector

B - Transmission Input Speed Sensor Connector

Brackets for Connectors, Securing the Wires

• The - arrows - in the illustration point towards the wire mounts and to the wiring fixture.






1 Transmission Output Speed Sensor Connector Bracket

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

2 Transmission Input Speed Sensor Connector Bracket

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

3 Transmission Fluid Temperature Sensor (G93)

4 Selector Lever