Ribbed Belt Overview

Ribbed Belt Overview






1 Vibration Damper

• Only possible to install in one position - The bores are offset.

2 Bolt

• 25 Nm

3 Generator

4 Accessory Bracket

• Removing and installing, refer to => [ Accessory Bracket ] Service and Repair.

5 Bolt

• 20 Nm + an additional 180° (1/2) turn.

• Always replace.

• Do not lubricate or grease the threads or collar.

• The additional turn can occur in several stages.

6 Belt Tensioner

• To release tension on the belt, rotate using an open end wrench. Refer to => [ Ribbed Belt ] Ribbed Belt.

7 Air Conditioning (A/C) Compressor

8 Bolt

• 45 Nm

9 Alignment Sleeve

10 Ribbed Belt

• Mark the direction of rotation before removing.

• Check for wear.

• Do not kink.

• Removing and installing, refer to => [ Ribbed Belt ] Ribbed Belt.