Belt Latch, 2-Door

Belt Latch, 2-door

• The following describes removing and installing the seat belt latch on the left seat. Removing and installing the right seat belt latch is identical.

Removing

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Position seat as far forward as possible.






- If present, disconnect wiring harness - 1 - from seat frame.

- Remove bolt - 2 - (20 Nm).

• The screw is micro-encapsulated and must be replaced every time it is loosened.

• Before new bolts are installed, the thread of the corresponding nut must be cleaned.

- Turn seat belt latch 90° clockwise - arrow A -.

- Swivel seat belt latch toward outside - arrow B -.

- Remove the seat belt latch from the mount in seat rail - arrow C -.

Installing

- Install in reverse order of removal.