Plenum Chamber Cover

Plenum Chamber Cover

Removing






- Remove the wiper arms.

- Remove the seal - 2 - from the plenum chamber cover - 1 -.


The window glass could be damaged.

Never use a screwdriver or a wedge or something similar to pry off the plenum chamber cover. The window glass could get damaged and could crack later.

- Lift off the plenum chamber cover - 1 - along the edge of the windshield by hand.

- Starting at the edge of the windshield - 6 - and working up, pull the plenum chamber cover - 1 - out of the retainer - 5 -.

- Remove the plenum chamber cover - 1 - from the vehicle.

Installation


The windshield - 6 - could break.

Using a hammer to install the plenum chamber - 1 - into the binding profile - 5 - on the windshield - 6 - can cause the windshield to crack.






• New windshields have a insert in the binding profile. Remove the insert before installing the plenum chamber cover.

• Press the plenum chamber cover lightly by hand into the binding profile. Never force hit it or use a tool to install it.

- Spray the retainer - 5 - with soapy water, so that it is easier to press down the plenum chamber covers - 1 -.

- Position the left plenum chamber cover - 1 - on the retainer - 5 - and then, starting in the middle, press it lightly into the retainer - 5 -.

- Press the seal - 2 - onto the plenum chamber cover - 1 -.

- Install the wiper arms.