Sunroof / Moonroof Windguard: Adjustments

Wind Deflector, Adjusting

Special tools, testers and auxiliary items required

• Special Hook (3370)

- Insert (3370) between roof edge and wind deflector bearing - 2 -.






- Pull wind deflector bearing - 2 - out of side locking mechanism of left and right guide rails using (3370) in - direction of arrow a -.

- Slide wind deflector - 1 - parallel into guide rails - arrow b - until dimension - c - is adjusted between 0.3 mm and 1.3 mm.

- Press wind deflector bearing - 2 - into guide rails.

• Wind deflector bearing must engage in guide rails audibly.