Lock Cylinder Cover Cap

Lock Cylinder Cover Cap

Removing

• Do not turn the screwdriver to pry off the lock cylinder cap.

• The lock cylinder and cap are on the driver side only.

- Gently insert a small screwdriver - 3 - - arrow a - into the hole on the bottom of the cap.






- Gently remove the cap - 1 - from the door with the screwdriver - arrow b -.

- Slide the cap upward and off the lock cylinder.

Installation

- Place the lock cylinder cap - 2 - gently at an angle from above - arrow a - on the lock cylinder.






- Press the lock cylinder cap - 2 - on to door - arrow b - until cover cap engages with lock cylinder.