Hood Release, Disconnecting

Hood Release, Disconnecting






- Open the hood.

- Remove the release cable clutch cover - 2 - from above the driver side headlamp on the lock carrier- arrow a -.

- Remove the release cables - 1 and 3 - from the cover - 2 - - arrow b -.

- Turn the release cable - 3 - 90° - arrow c - and remove it from the mount - 1 - in the - direction of arrow d -.

• Make sure the grommets - 4 and 5 - are secure when installing the release cable - 3 -.

• Make sure the cable coupling is correctly connected together when installing the release cable - 1 -.

• Before closing the hood, test the release lever and the release.