Amplifier: Service and Repair

Amplifier






View of removed amplifier:

Perform the following steps before starting:

- Switch off ignition, switch off all electrical consumers and remove ignition key.

Amplifier is installed under front left seat.

- Move seat into uppermost and rearmost position.

- Unclip the cover on the bottom of the seat in - direction of arrow -.






- Remove screws - arrows - on amplifier.






- Pull out the amplifier just far enough until the connector is accessible.

- Move the lever in - direction of arrow -. This will push the connector out of the amplifier.






- Remove amplifier.

Installing

Install the amplifier in - direction of arrow -.






- When installing the amplifier, be sure to slide it in - direction of arrow A - so that it fits into the notch - arrow B -.






Further installation is in the reverse sequence to removal.