Hood

Hood

Removing

• The caps - 5 - are not available for all markets.






- Remove the spray nozzles - 2 -.

- Unclip the washer fluid hose - 6 - from the hood - 1 -.

- Remove the washer fluid hose - 6 - from the hood - 1 -.

- Remove the caps - 5 - from the nuts.

- Loosen the left and right nuts - 4 - from the hinge - 4 - (do not remove the nuts).

A second technician is required for the rest of the removal procedure.

- Remove the gas-filled strut - 7 -, refer to => [ Hood Gas Strut ] Hood Gas Strut.

- Remove the nuts - 4 - and lift the hood - 1 - out of the hinges - 3 -.

Installation

• The caps - 5 - are not available for all markets.






Install the hood - 1 - in reverse order of removal.

• Route the hose - 6 - in a bow as illustrated. Be sure not to twist the hose.

- Tightening specifications: nuts - 4 - 22 Nm.

- Adjust the hood - 1 -. Refer to => [ Hood, Adjusting ] Adjustments.