Front Crankshaft Seal: Service and Repair

Vibration Damper Shaft Seal

Special tools, testers and auxiliary items required

• Thrust Piece (T10354)

• Pulling Hook (T20143/2)

Removing

- Remove the vibration damper. Refer to => [ Vibration Damper ] Service and Repair.

- Remove the vibration damper and install the thrust piece (T10368).






- Remove the shaft seal using the pulling hook (T20143/2).

Installing

• Tightening specifications, refer to => [ Ribbed Belt Overview ] Ribbed Belt Overview.

- Clean the running and sealing surface.

- Remove the thrust piece (T10368).

- Pull the seal - arrow - using the thrust piece (T10354) and the vibration damper bolt in all the way.






• Replace the vibration damper bolt

• Replace the O-ring

The rest of the installation is basically a reverse of the removal sequence.