Diagram 103/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


tiptronic switch, Transmission control module, Data bus on board diagnostic interface, Selector lever scale illumination bulb, Diagnostic connection, Transmission range display





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F189 - tiptronic switch Locations Tiptronic Switch -F189- / Selector Lever Park Position Lock Switch -F319- / Shift Lock Solenoid -N110-

J217 - Transmission control module Control Modules in Engine Compartment Transmission Control Module -J217-

J533 - Data bus on board diagnostic interface Control Modules in Interior

L101 - Selector lever scale illumination bulb

T10x - 10-pin connector, under the selector lever

T16d - 16-pin connector

T20e - 20-pin connector

T52 - 52-pin connector

U31 - Diagnostic connection

Y6 - Transmission range display

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B384) - Powertrain CAN bus high connection 2 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B391) - Powertrain CAN bus low connection 2 (in main wiring harness)

(B444) - OBD connection 1 (in main wiring harness)

Previous Diagram 103/4 (Tracks 29-42)

Next Diagram 103/6 (Tracks 57-70)