Torque Converter Seal

Torque Converter Seal

Special tools, testers and auxiliary items required

• Extractor Lever (VW 681)

• Thrust Piece (3295)

Removing

- Insert the (VW 681) directly behind the sealing lip of the seal, so that the contact ring which is behind it is not damaged.

Installing

- Lubricate the outer circumference and sealing lips of the seal with Automatic Transmission Fluid (ATF).

Installed position:

The open side of the seal faces the transmission.

- Using (3295), drive in the seal for the torque converter until the (3295) stops.