Selector Shaft Seal

Selector Shaft Seal

Special tools, testers and auxiliary items required

• Thrust Piece (T10174)

• Scribe

- Be careful when using a scribe to remove seals.

- Apply Automatic Transmission Fluid (ATF) to the circumference and space between the sealing lips of the new seal.

Installed position:

The open side of the seal faces the transmission.

- Drive in the new seal using (T10174), thereby not distorting the seal.

- Install the multifunction transmission range switch. Refer to => [ Multifunction Transmission Range Switch ] Multifunction Transmission Range Switch.