Rear Parking Aid Display (Y15)

Rear Parking Aid Display (Y15)

Rear Parking Aid Display is installed in molded headliner above rear windshield.


When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Carefully pry out Rear Parking Aid Display from molded headliner - arrows -.






- Disconnect electrical connection - arrow -.






Installation

Install in reverse order of removal.