Parking Lamp Bulb

Parking Lamp Bulb

• The following illustrations show the procedure for replacing the parking lamp bulb on the right headlamp. The procedure for the left headlamp is similar.

Removing

- Turn off the ignition and all electric consumers and remove the key.

- Pull off cover cap - 1 -.






- Pull the parking lamp bulb - 1 - socket out of the reflector, while being careful of connected wires.






- Remove parking lamp - 2 - in - direction of arrow - from lamp socket - 1 -.






Installing


When installing the cover cap, make sure the cap is properly seated. It is destroyed by entry of water into headlamp.

• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Check headlamp for function.