Tail Lamp Bulb, Rear Lid

Tail Lamp Bulb, Rear Lid

• The following illustrations shows the removing and installing of the left tail lamp bulb (M4) in the tail lamp cluster on the left side of the vehicle. Removing and installing right tail lamp bulb (M2) in the rear lid on the right side is identical.

Removing

- Turn off the ignition and all electric consumers and remove the key.

- Unclip cover - 1 - in direction of - arrow - from panel.






- Disconnect the connector - 1 -.






- Carefully pry out the tail lamp bulb - 1 - socket with a suitable screwdriver.






- Pull the tail lamp bulb - 1 - out of the bulb socket - 2 - in - direction of arrow -.






Tail lamp bulb: 12V, 5 W

Installing

Installation is performed in the reverse order of removal. Note the following:

• When mounting the tail lamp harness connector into the rear lid, it must "audibly" latch.

- Check the tail lamp functions