Radiator

Radiator

Removing

- Drain the coolant. Refer to => [ Draining and Filling ] Procedures.

- Remove the fan shroud. Refer to => [ Fan Shroud ] Fan Shroud.

- Loosen the clamps - arrows -, remove the charge air hose and seal the charge air cooler with a clean cloth.






- Remove the bracket - 1 - by removing the bolts - arrows -.






- Disengage the clamps and remove the connection - arrow - from the radiator.






- Likewise, disconnect the connection on the right side of the radiator.

- Remove the bolt - arrow -.






- Remove the bolts - arrows - and remove the radiator downward.






Installing

Installation is performed in reverse order.

• Tightening specifications, refer to => [ Radiator, Fan Shroud and Fans Overview ] Radiator, Fan Shroud and Fans Overview.