Diagram 30/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Trailer Operation Indicator Lamp, Towing Recognition Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Control Modules in Pass Compartment

J345 - Towing Recognition Control Module Control Modules in Luggage Comp.

J519 - Vehicle Electrical System Control Module Control Modules in Pass Compartment

J533 - Data Bus On Board Diagnostic Interface Control Modules in Pass Compartment

K - Instrument Cluster

T2i - Double Connector, black

T2iv - Double Connector, black

T12h - 12-Pin Connector, red

T20 - 20-Pin Connector, red

T36 - 36-Pin Connector

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

* - Only models with preparation for Trailer Operation

Previous Diagram 30/5 (Tracks 43-56)