Selector Lever Handle

Selector Lever Handle

Removing

- Move selector lever in position "R".

- Slide sleeve - 1 - downward.





- Pull button - 2 - out of handle - 4 - until it stops - arrow -.

- Secure button from springing back e.g. using a wire bracket - 3 -.

- Remove selector lever handle.

Installing

- Move selector lever in position "R".

- Pull button - 2 - out of handle - 4 - until it stops - arrow -.





- Secure button from springing back e.g. using a wire bracket - 3 -.

• Installation position: Button faces driver.

- Press handle onto selector lever up to stop.

- Remove wire bracket.

- Press button to secure pull lever - 5 - in pull-rod - 6 -. Button must now spring back to stop again.

- Rotate and slide sleeve - 1 - upward until tabs in sleeve engage and lock audibly into slots of handle - 4 -.

- Move selector lever in position "P".