Steering Angle Sensor: Service and Repair

Steering Angle Sensor

Removing

- Remove airbag and steering wheel.

- Put wheels in straight-ahead position.

- Remove cover in footwell.

- Remove bolts - 1 -.





- Remove handle for height and length adjustment - 5 -.

- Remove bolts - 2 -, - 3 - and - 4 -.

- Remove lower part of trim for steering column switch.

- Remove upper part of steering column switch trim - 1 -.





Steering angle sensor (G85) is installed in housing - 1 - together with spiral spring.





- Disconnect connectors - 1 - and - 2 -.





- Carefully lift hooks - arrows - and disconnect Steering angle sensor (G85).





Installing

Steering angle sensor (G85) must be in center position before installation.

- Position steering angle sensor (G85) until tabs engage.

- Remove transport protection.

- A yellow dot must be visible in the hole - arrow 1 -.





- Markings - arrows - must align.

Be sure that center position is maintained.

Rest of installation is in reverse order of removal.

- Install airbag and steering wheel.

- Perform basic setting of steering angle sensor ( G85).