License Plate Bulb: Service and Repair

License Plate Bulb, From 07.2005

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

Removing

- Remove screws - arrows -.





- Remove the lens from the license plate lamp.

- Remove the bulb.

Tubular bulb 12 V/5 W

Installing

CAUTION!
• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Install in reverse order of removal, noting the following:

- Tighten the screws to 2 Nm.

- Check the license plate lamp function.