Sill Panel Trim

Sill Panel Trim

=> [ Sill Panel ]

=> [ Sill Panel Trim, Convertible ]

Sill Panel

Removal





- Remove lower A pillar trim. Refer to => [ Lower A-pillar Trim ] .

- Remove side trim. Refer to => [ Side Trim Assembly Overview ] .

- Unclip sill panel - 1 - upward.

Installation

To install, perform the steps used in removal in reverse order.

• Before installing the sill panel, check the clips -=> [ (Item 2) Clips ] Sill Panel Trim Assembly Overview- and replace, if necessary.

• After installing, make sure that sill panel seal is properly seated - 3 -.

Sill Panel Trim, Convertible

Removal





- Remove operating lever.

- Remove bolt - 5 - and remove expanding nut - 6 -.

- Remove side trim. Refer to => [ Side Trim Assembly Overview ] Pillar and Side Trims, Convertible Overview.

- Unclip sill panel - 1 - upward.

Installation

To install, perform the steps used in removal in reverse order.

• Before installing the sill panel, check the clips -=> [ (Item 2) Clips ] Sill Panel Trim Assembly Overview- and replace, if necessary.

• After installing, make sure that sill panel seal is properly seated - 8 -.