Diagram 199/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Motronic Engine Control Module (ECM) Power Supply Relay, Vehicle Electrical System Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

B - Starter

C - Generator (GEN)

J271 - Motronic Engine Control Module (ECM) Power Supply Relay Locations

J519 - Vehicle Electrical System Control Module Locations Locations

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations

N205 - Camshaft Adjustment Valve 1 Locations

SA1 - Fuse 1 (on fuse panel A)

SA3 - Fuse 3 (on fuse panel A)

SB24 - Fuse 24 (on fuse panel B)

T14a - 14-Pin Connector

T40 - 40-Pin Connector

(1) - Ground strap, battery to body

(12) - Ground Connection (in engine compartment, left)

(507) - Threaded Connection - terminal 30 (on battery fuse holder)

(652) - Transmission/Engine Ground Connection

(A99) - Connection 1 (87) (in instrument panel wiring harness)

(D181) - Connection 2 (87a) (in engine compartment wiring harness)

(*) - See Applicable Wiring Diagram Engine

Next Diagram 199/3 (Tracks 15-28)