Wheel Housing Trim

Wheel Housing Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Remove seat bench. Refer to => [ Seat Bench ] Seat Bench.

- Remove side upholstery:

• with rear side airbags, refer to => [ Side Upholstery with Side Airbag ] Side Upholstery with Side Airbag.

• without rear side airbags, refer to => [ Side Upholstery without Side Airbag ] Side Upholstery without Side Airbag.

- Remove the two bolts - 1 - (1.5 Nm).

- Remove clip - 2 - from body flange.

- Pull trim - 3 - from door seal piping - 4 -.

- Pull trim out of mounts in sill panel trim - 5 -.

- Pull out trim in direction of travel under C-pillar trim panel.





Installation

- To install, perform the steps used for removal in reverse order.