Left Rear Level Control System Sensor, AWD

Left Rear Level Control System Sensor, AWD

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1783)

Removing

- Disconnect the connector.






- Remove the bolts.

- Remove Left Rear Level Control System Sensor (G76).

Installing

Install in reverse order of removal. Note the following:

The level control system sensor lever must point toward vehicle exterior.

- Perform a basic setting on the adaptive chassis DCC. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Testing and Inspection.

- Perform a basic setting on the headlamps using the Vehicle Diagnosis, Testing, and Information System (VAS 5051) in "Guided Fault Finding" function.

Tightening Specifications