Secondary Air Injection Solenoid Valve (N112)

Secondary Air Injection Solenoid Valve (N112)

Removing

- Disconnect the connector - 1 - and remove the connecting pipe - 2 -.






- Remove the bolts - arrows - from the Secondary Air Injection (AIR) pipe.

- Remove the bolts from the AIR solenoid valve and remove the valve.






Installing

- Replace the gaskets.

- Only tighten the bolts by hand.

- Tighten the AIR pipe bolts - arrows - to the AIR solenoid valve.

- Connect the connector - 1 - and connecting pipe - 2 -. Make sure the connecting pipe is seated securely.






Tightening Specifications