Rear Window Wiper Motor (V12)

Rear Window Wiper Motor (V12)

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1331)

Removal

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the lower rear lid trim panel..

- Disconnect the connector - 1 -.






- Remove nuts - arrows -.

- Carefully remove the rear window wiper motor from the rear lid toward the inside.

Installation

Install in reverse order of removal, noting the following:

- Check seal for correct fitting in rear window opening. Marking - 1 - of seal must align with marking - 2 - on rear window.






- Connect battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.