Fresh Air Blower (V2), Climatronic

Fresh Air Blower (V2), Climatronic

Removing

The fresh air blower is accessible from footwell on front passenger side.

- Remove the glove compartment.

- Remove the plastic screws - 2 - and the partition - 1 -.






- Disconnect harness connector - A - from the fresh air blower.






- Remove the bolt - B - (1 Nm) from the fresh air blower.

- Release the retainer - 2 - and turn the fresh air blower in - direction of arrow -.

- Remove the fresh air blower from the heater.

Installing

Install in reverse order of removal.