Wheel Housing Trim, 4-door

Wheel Housing Trim, 4-door

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Remove the rear bench seat. Refer to => [ Bench Seat ] Bench Seat

- Remove 4-door side upholstery:

• With rear side airbag, refer to => [ Side Upholstery with Side Airbag, 4-door ] Side Upholstery with Side Airbag, 4-door

• Without rear side airbag, through 06.05, refer to => [ Side Upholstery, 4-door ] Side Upholstery, 4-door

- Remove the two bolts - 1 - (1.2 Nm).

- Remove clip - 2 - from body flange.

- Pull trim - 3 - from door seal piping - 4 -.

- Remove the trim from the mounts in sill panel strip - 5 -.

- Remove the trim under the C-pillar trim.






Installing

- Install in reverse order of removal.