Brake Fluid Level Sensor/Switch: Service and Repair

Brake Pressure Sensor 1

The brake pressure sensor is located on the master cylinder through 01.12.06.

Removing

- Remove the master cylinder. Refer to => [ Brake Master Cylinder ] Service and Repair.

- Remove the brake pressure sensor 1 (G201).

Installing

- Installation is performed in the reverse order of removal.





- Bleed the brake system. Refer to => [ Brake System Bleeding ] Service and Repair.

After bleeding the brake system, the brake pressure sensor 1 basic setting must be performed.

(VAS 5051), connecting and selecting functions. Refer to => [ VAS 5051, Connecting and Selecting Functions ] Testing and Inspection.