12-way Seat Height Adjustment Drive Motor

12-way Seat Height Adjustment Drive Motor

Removing

- Remove belt anchor. Refer to => [ Belt Anchor ] Belt Anchor

- Position seat as far up as possible using height adjustment.

- Remove 12-way seat. Refer to => [ 12-way Seat ] 12-way Seat

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Secure 12-way seat on fixture for seat repair (VAS 6136).

- Remove front seat trim. Refer to => [ 12-way Seat Trim ] 12-way Seat Trim

- Remove belt buckle. Refer to => [ Front Belt Buckle, 12-way Seat ] Front Belt Buckle, 12-way Seat

- Remove front seat control module. Refer to => [ 12-way Seat Control Module ] 12-way Seat Control Module.

- Remove seat longitudinal adjuster. Refer to => [ 12-way Seat Longitudinal Adjustment ] 12-way Seat Longitudinal Adjustment.

- Remove the two screws - 3 - (18 Nm) and remove seat height adjustment drive motor - 2 - from seat longitudinal adjuster - 1 -.

• Two retaining tabs determine the drive motor installation position in the seat longitudinal adjuster.





Installation

- To install, perform the steps used for removal in reverse order.