C-Pillar Trim

C-Pillar Trim

• Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the same manner.

Removing

- Remove airbag emblem - 1 - and remove screw - 2 -.

- Fold seat cushion forward and remove bolt - 3 - (50 Nm).

- Remove belt anchor - 4 - from body.

- Pull C-pillar trim out of mountings in body and door seal molding.

- Remove trim and pull seat belt through opening in trim.





Installation

- To install, perform the steps used for removal in reverse order.

• Before installing, inspect the securing clips for damage and replace if necessary.

• When installing trim, do not press belt height adjustment button.

• During installation, attach trim from bottom upwards toward belt height adjuster.