Shift Cable: Description and Operation

Selector Mechanism Assembly Overview

CAUTION!
Shift the selector lever into the "P" position and press the foot operated parking brake before working with the engine running.





1 Selector Lever Handle

• Removing and installing, refer to => [ Selector Lever Handle ] Selector Lever Handle.

2 Clip

3 Selector

4 Emblem

• Self-adhesive.

5 Sleeve

6 Cover

• With selector indicator.

• Removing and installing, refer to => [ Selector Mechanism Cover ] Selector Mechanism Cover.

7 Printed Circuit Board

• With the Tiptronic switch (F189).

8 Cover Strip/Frame

• Removing and installing, refer to => [ Cover Strip/Frame ] Cover Strip/Frame.

• Be careful of the Tiptronic switch signal magnet in the cover strip. Refer to => [ Tiptronic Switch Signal Magnet ] Tiptronic Switch Signal Magnet.

9 Wire

• Removing and installing, refer to => [ Selector Lever Park Position Lock Switch ] Selector Lever Park Position Lock Switch.

10 Shift Lock Solenoid (N110)

• Removing and installing, refer to => [ Shift Lock Solenoid ] Service and Repair.

11 Selector Lever Park Position Solenoid (N380)

• Removing and installing, refer to => [ Selector Lever Park Position Solenoid ] Selector Lever Park Position Solenoid.

12 Bolt

• 20 Nm

• Quantity: 4

13 Bracket

14 Bracket

15 Selector Mechanism

• With the shift lock solenoid and selector lever park position solenoid.

• Release the selector lever in the case of power outage (emergency release). Refer to => [ Selector Lever Emergency Release ] Description and Operation.

• Can be removed upward.

16 Bolt

• Adjusting, refer to => [ Adjusting ] Adjustments.

17 Mounting Bracket/Cover

• Can only be removed downward.

18 Retaining Washer

• Always replace.

19 Selector Lever Cable

• Is removed together with the selector mechanism - item 15 -.

• Adjusting, refer to => [ Adjusting ] Adjustments.

20 Retaining Washer

• Always replace.

21 Mounting Bracket

• For the selector lever cable to the transmission.

• When tightening, ensure the bracket does not distort.

22 Bolt

• M6 - 10 Nm

• M8 - 23 Nm

• Self locking

• Always replace

• Allocation, refer to the parts catalog.

• The threaded holes for the bolts in the transmission must always be cleaned. (for example, with a thread tap).