Crankshaft Seal, Timing Chain Side

Crankshaft Seal, Timing Chain Side

Special tools, testers and auxiliary items required

• Assembly Tool (T10122)

• Pulling Hook (T20143)

Removing

• Engine or transmission removed.

- Remove the drive plate. Refer to => [ Drive Plate ] Service and Repair.

- Pry out the seal using (T20143/2).





Installing

- Drill an 8 mm hole - arrow 2 - in the (T10122/2) for the alignment sleeve.





- Use the hole - arrow 1 - in the washer as a template when drilling.

- Clean the running and sealing surfaces.





- Install the (T10122/1) to the (T10122/2) and slide the seal - A - onto the (T10122/2).

- Remove the (T10122/1).

- Install the (T10122/2) with the seal to the crankshaft.





- Press in the seal all around evenly and flush using (T10122/3).





- Install the drive plate. Refer to => [ Drive Plate ] Service and Repair.