Crankshaft Axial Clearance, Checking

Crankshaft Axial Clearance, Checking

Special tools, testers and auxiliary items required

• Dial Gauge Holder (VW 387)

• Dial Gauge 0-10 mm (VAS 6079)

Procedure





- Attach the dial gauge to the cylinder block using (VW 387) and position it against the crankshaft counterweight.

- Press the crankshaft against the dial indicator by hand, set the indicator to "0".

- Press the crankshaft off the dial indicator and read the value:

• Axial play new: 0.090 to 0.215 mm

• Axial play wear limit: 0.280 mm