Bracket for Spare Wheel

Bracket for Spare Wheel

Removing





- Open the bracket for spare wheel - 1 -.

- Remove spare wheel, refer to => [ Spare Wheel ] Spare Wheel

- Remove gas strut - 4 -, refer to => [ Gas Strut ] Gas Strut.

- Disconnect the connector - 2 -.

- Remove the nuts - 3 - and remove the spare wheel mount - 1 -.

Installing

To install, perform the steps used for removal in reverse order.

- Tightening specification: Hex nuts - 3 - 40 Nm.