Rear Lid

Rear Lid

Removing





- Open the rear lid hinged window.

- Open the rear lid.

• Make sure the rear lid hinged window does not fall into the lock. Otherwise the rear lid cannot be removed by itself.

- Remove the rear lid trim panel and the window frame.

- Pull down cover caps - arrows - and unscrew bolts - 3 - from trim - 5 - and remove trim from lid hinge - 4 -.

- Harness connectors must be disconnected from installed electrical components and hoses.

- Loosen bolts - 2 - (do not unscrew completely).

- A second mechanic is required for the rest of the removal procedure.

- Only now remove the screws - 2 - and remove the rear lid - 1 -.

Installation

To install, perform the steps used for removal in reverse order.

- Adjust the rear lid. Refer to => [ Rear Lid, Adjusting ] Rear Lid, Adjusting