Diagram 71/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine speed sensor, Charge air pressure sensor, Knock sensor 1, Engine coolant temperature sensor, Intake manifold runner position sensor, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine speed sensor Engine Management System [1][2]Diagrams

G31 - Charge air pressure sensor Engine Management System [1][2]Diagrams

G61 - Knock sensor 1 Engine Management System [1][2]Diagrams

G62 - Engine coolant temperature sensor Engine Management System Engine Coolant Temperature Sensor -G62-

G336 - Intake manifold runner position sensor Engine Management System [1][2]Diagrams

J623 - Engine control module Control Modules in Engine Compartment

T2bo - Double connector

T2ef - Double connector

T3cg - 3-pin connector

T3eg - 3-pin connector

T4eh - 4-pin connector

T6 - 6-pin connector Component Locations

T14a - 14-pin connector Component Locations

T60 - 60-pin connector

(220) - Sensor ground connection (in engine compartment wiring harness)

(D107) - Connection (5) (in engine compartment wiring harness)

(D108) - Connection (6) (in engine compartment wiring harness)

Previous Diagram 71/8 (Tracks 85-98)

Next Diagram 71/10 (Tracks 113-126)