Front Turn Signal Bulb

Front Turn Signal Bulb

• The following illustrations show the procedure for replacing right front turn signal bulb (M7) inside the right headlamp. The procedure for replacing the left front turn signal bulb (M5) in the left headlamp is similar.

Removing

- Turn off the ignition and all electric consumers and remove the key.

- Pull off cover cap - 1 -.






- Turn the socket - 1 - and the front turn signal lamp in the - direction of arrow - and remove them from the reflector, while being careful of connected wires.






- Press the front turn signal lamp - 2 - into the socket - 1 - and turn it in the - direction of arrow - to unlock it.






Front turn signal lamp : 12V, 21 W

Installing


When installing the cover cap, make sure the cap is properly seated. It is destroyed by entry of water into headlamp.

• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Check headlamp for function.