Brake Pedal Assembly Overview

Brake Pedal Assembly Overview


The path of the brake pedal must not be shortened via extra floor mats.

Before installing, lubricate all mounting points with grease, part no. G 000 602.






1 Mounting Bracket

2 Self-Locking Hex Nut

• Always replace after removal

• 25 Nm

• First tighten the hex nuts - A and B -.

3 Noise Insulation on the Brake Pedal

4 Clamping Washer

5 Brake Pedal

• Clip brake pedal to push rod for brake booster => [ Hold the push rod ball head in front of
the mount and push the brake pedal toward the brake booster until the ball
head engages audibly. ] Brake Pedal and Brake Booster

6 Self-Locking Hex Nut

• 25 Nm

7 Cover

8 Ball Socket

9 Mount

• For ball head of brake servo push rod

10 Hex Head Bolt

11 Bushing

12 Pivot Pin