Antenna Amplifier: Service and Repair

Antenna Amplifier

There is one antenna amplifier. It is installed at right of rear lid near rear window.

Removal

Perform the following steps before starting:

- Turn off the ignition and all electric consumers and remove the key.

It is necessary to remove the rear lid trim panel first in order to be able to remove the antenna module.

- Disconnect the connector on the antenna module.

- Remove screws - arrow -.






- Move the antenna module in - direction of arrow - to the right and remove it from the rear lid.






Installation

Install in reverse order of removal.

When installing, ensure amplifier is remounted on the locations where it was mounted before it was removed.