Rear Window Wiper Motor

Rear Window Wiper Motor

Removing

- Remove the lower trim from the rear hatch

- Disconnect electrical connection - 1 -.





- Rotate clip at hose connection to release - 2 -.

- Remove hose connection from Rear windshield wiper motor.

- Remove nuts - arrows -.

- Carefully pull off Rear Window Wiper Motor from rear lid.

Installing

Install in reverse order of removal, noting the following:

- Check seal for correct fitting in rear window opening. Marking - 1 - of seal must align with marking - 2 - on rear window.





- Reconnect battery. Refer to=> [ Specifications ] Specifications.