Intermediate Shaft, CV Joint VL 107

Intermediate Shaft, CV Joint VL 107

Special tools, testers and auxiliary items required

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Thrust Piece (T10032)

• Press Support (3118)

• Kukko Separating Tool (15-2)

Pressing off bearing

- Press the bearing off from the intermediate shaft as shown in the illustration.





The jaws of the Kukko separating tool (15-2) must face toward the shaft.

1 - Intermediate shaft with bearing

2 - Thrust plate (VW 402)

3 - Thrust plate (VW 401)

4 - Kukko separating tool (15-2)

• When pressing out, hold the shaft tightly.

Pressing on Bearing





- Press the bearing onto the intermediate shaft up to the stop as shown in the illustration.

1. Press piece (T10032)

2. Intermediate shaft

3. Rubber mount

4. Press piece (3118)

5. Thrust plate (VW 401)

6. Kukko separating tool (15-2)

7. Thrust plate (VW 402)

The recess - arrow - of the (3118) must face toward the bearing.