Rear Lid Trim

Rear Lid Trim Panel, Rabbit from MY 2009

Rear Lid Trim

Removal

- Remove two screws - arrows - from handle recess (1.5 Nm).

- Loosen the trim panel from the mounts in the rear lid - 1 - using the wedge (T10383). Start from lower edge of tailgate.

- Remove rear lid trim on both sides from window frame trim - 2 -.

- Remove the trim panel from the mounts in the rear lid near the aligning pins.





Installation

- To install, perform the steps used for removal in reverse order.

• Before installing, check securing clips for damage and replace if necessary.