Hood Insulator / Pad: Service and Repair

Insulation

Removing





- Using pry lever (80-200), pry out retaining clips - 1 - (Qty. 10) from insulation - 2 -.

- Pull insulation - 2 - out of longitudinal holes.

Installing





- Slide insulation - 2 - under gas-filled strut and insert mounting tabs into longitudinal holes.

- Engage all retaining clips - 1 - (Qty.. 10) in insulation - 2 -.

• When installing insulation - 2 -, make sure that retaining clips - 1 - are inserted with wide side facing outside.