Front Bumper Cover

Front Bumper Cover

• Removal and installation may be slightly different depending on the engine installed in the vehicle.

Removing





- Remove radiator grille => [ Radiator Grille ] Radiator Grille

- Remove bolts - 5 - and - 6 -.

- Remove bolts - 4 - from below.

- Unscrew bolts - 3 - and - 2 - (pointing upward) in area of left and right wheel housing liners.

A second technician is required for the rest of the removal procedure.

- Press left and right retaining hooks - 5 - down - arrow - and with a second technician, remove cover - 1 - parallel from guide profiles.

- Disconnect harness connectors of installed electrical components and hoses.

Installing

To install, perform the steps used for removal in reverse order.

- Make sure gaps are parallel and pay attention to gap dimensions