Fixed Rear Door Window With Window Guide

Fixed Rear Door Window with Window Guide

• Removing and installing is described only for the right fixed window with window guide. Removing and installing the left fixed window with window guide is similar

• When removing and installing door window, spreader pin and spreader plug are also accessible from outside when outer door plate has been removed.

Removing

- Remove outer door panel => [ Outer Door Panel ]

- Remove door window => [ Rear Door Window ] Rear Door Window

- Pull window guide - 1 - out of center bar - 3 - and guide window guide inward.





- Remove screws - 2 - and slide center bard - 3 - downward - arrow a -.

- Remove center bar - 3 - from seal of fixed door window - arrow b -.

- Disengage window guide - 1 - with fixed door window - 2 - on inside and outside all around from window frame - 4 -.





- Using release tool (T 10236), disengage retaining tab on guide pin - 3 - in window frame - 4 -.





- Remove complete window guide - 1 - with fixed door window - 2 - from window frame - 3 - in - direction of arrow -.

Installing

To install, perform the steps used for removal in reverse order.

Middle bar bolts tightening specification: 5.5 Nm

• While installing fixed door window with window guide, make sure it is seated evenly (wind noise).