Input Shaft and Pinion Shafts, Differential and Shift Forks

Input Shaft and Pinion Shafts, Differential and Shift Forks





1 Differential

• Disassembling and assembling --> [ Differential, Adjusting ] Differential, Adjusting

2 Seal

• Quantity: 4

• Always replace

3 Output shaft

• Disassembling and assembling --> [ Output Shaft ] Output Shaft

4 Reverse shaft support

• Disassembling and assembling --> [ Reverse Shaft ] Reverse Shaft

5 Reverse shaft

• Disassembling and assembling --> [ Reverse Shaft ] Reverse Shaft

6 Input Shaft

• Disassembling and assembling --> [ Shift Forks, Disassembling and Assembling ] Shift Forks, Disassembling and Assembling

7 Reverse gear shift fork

• Disassembling and assembling --> [ Shift Forks, Disassembling and Assembling ] Shift Forks, Disassembling and Assembling

• Installation position --> [ Installing ] Disassembly and Assembly Sequence

8 Inner Torx bolt, 25 Nm

9 Selector Mechanism

• (Shift forks)

• Disassembling and assembling --> [ Shift Forks, Disassembling and Assembling ] Shift Forks, Disassembling and Assembling

10 Clutch housing

• Servicing --> [ Transmission Housing and Clutch Housing, Servicing ] Transmission Housing and Clutch Housing, Servicing

11 Nut, 25 Nm and turn 90° further

• 4 nuts for bearing mount

12 Flange shaft with spring

• Removing and installing --> [ Left Flange Shaft Seal, Replacing ] Left Flange Shaft Seal, Replacing

• Assembling --> [ Differential, Disassembling and Assembling ] Differential, Disassembling and Assembling

13 Countersunk bolt, 25 Nm