Middle and Rear Mufflers, Separating and Connecting

Middle and Rear Mufflers, Separating and Connecting

• A separating point has been provided in the connecting pipe for individual replacement of the center or rear muffler.

• The separating point is marked by depressions around the circumference of the exhaust pipe.

Special tools, testers and auxiliary items required

• Body repair saw (VAG 1523A) or

• Chain pipe cutter (VAS 6254)

• Protective eyewear

Separating

CAUTION!
To prevent injuries from metal shavings, wear protective goggles and protective clothing.

- Cut the exhaust pipe at the separation point - arrow 2 - e.g. using the (VAG 1523A) at a right angle.





Connecting

• A second mechanic is required for installing the repair clamp.

- Secure the center muffler in the mountings. The front clamp remains loosely connected to the pipes.

- Align the rear muffler horizontally and hold it in this position.

- Position the repair clamp at the side markings - arrow 1 - and - arrow 3 -.

- Position the repair clamp - A - as shown and tighten it to 25 Nm.





- Then align the exhaust system free of tension. Refer to --> [ Exhaust System, Installing ] Exhaust System, Installing.